Texmo Solvent Joint Plumbing System For Cold Water

Cold Water conveyance is the Plumbing system. TEXMO Plumbing System is best suitable for conveyance of water up to temperature level of 600 C. This system was accepted and recommended by WHO in water application.

PRODUCT SPECIFICATION

The system is made as per ASTM standards. (American Society for testing of Materials)
PIPES STANDARDSASTMD 1785 (FOR SCH 40 & SCH 80 PIPES)
COLOURBlue and White in UV stabilization
MATERIALPVC Compound
SOLVENT CEMENTHeavy Duty (Joints tested upto 35kg/cm2 pressure)
STANDARD LENGTH3 meters and 6 meters in threaded and plain end.
PRESSURE CLASSPipes -SCH 40 and SCH 80, Fitting - SCH 80
RANGEPipes up to 2" and fittings upto 2" sizes

Joint Method

Cutting

Cut the pipe square to the required length by cutter, Debur the cut end, if necessary.

Cleaning

Prior to joining, the pipe and fitting should be clean & dried properly.

Scrubing

Scrub the O.D. of the pipe and the I.D. of fitting by using sand paper and clean it with cloth.

Assembly of joint

Within 20 second of application of solvent cement to the pipe

Solvent Cement

Apply gently and uniformly to the scrubbed I.D. of fitting and scrubbed O.D. of pipe with an applice. Apply another coating of cement to the O.D. of the pipe.

Step 6

Apply lubricant on the plain (spigot) end for at least half insertion depth already.

Cutting

Cut the pipe square to the required length by cutter, Debur the cut end, if necessary.

Cleaning

Prior to joining, the pipe and fitting should be clean & dried properly.

Scrubbing

Scrub the O.D. of the pipe and the I.D. of fitting by using sand paper and clean it with cloth.

Assembly Of Joint

Within 20 second of application of solvent cement to the pipe

Solvent Cement

Apply gently and uniformly to the scrubbed I.D. of fitting and scrubbed O.D. of pipe with an applice. Apply another coating of cement to the O.D. of the pipe.

Apply Lubricant

Apply lubricant on the plain (spigot) end for at least half insertion depth already.

STANDARD BUNDLE PACKAGING IN DIFFERENT SIZES:

1/2"03/041"1.25"1.5"2"2.5"3"4"
252520101010101010

PRODUCTS RANGE

Plumbing Pipes

ASTMDISScheduleSIZES
ASTM D-2846 - SDR 11IS : 15778Schedule 40 ½" to 2"
ASTM D-2846 - SDR 13.5IS : 15778Schedule 802½" to 6"

Plumbing Fittings

ASTMDISScheduleSIZES
ASTMD 2846IS : 15778Schedule 80½" to 2"
ASTM F 441IS : 15778Schedule 802½" to 4"